Kwik COMP is a combined application of EFIS and DMAP. It provides a split screen showing the primary flight display and digital moving map on a single device. COMP can optionally integrate with the Stratux ADS-B/AHRS to provide real-time traffic and enhanced attitude information.
Synthetic Vision
Synthetic vision is built from the USGS 3 arc second Digital Elevation Model data. If enabled, it also allows for some terrain collision detection. The required terrain data packages are available via F-Droid, see:
Flight Director
Kwik EFIS has a fully functional flight director built in. It uses the standard V-Bar symbology common to modern flight directors. The target waypoint and altitude is set on-screen by means of the spinner controls on the right top and bottom of the screen.
Airspace
Airspace data is provided from Worldwide Soaring Turnpoint Exchange Airspace http://soaringweb.org/Airspace/
- North West Sector: United States/Canada.
- North East Sector: Europe(Denmark, Germany, Switzerland)/Russia.
- South West Sector: South America.
- South East Sector: Australia/South Africa.
ADS-B/AHRS
In addition to the internal sensors, a low cost Stratux ADS-B/AHRS can be selected as the input source. See Stratux ADS-B for more information.
Simulator
There is a simulation mode available in the application. The Flight director is used to select a waypoint and altitude and the simulator will generate the GPS movements to navigate to the selected waypoint. The speed is set at the typical cruise for the currently selected aircraft.
Companion Applications
Kwik EFIS is the primary flight display application of the EFIS. It provides a modern attitude and flight instrument display.
Kwik DMAP is a stand-alone digital moving map application. It provides situational awareness and navigation functionality.
Help
Packages
Although APK downloads are available below to give you the choice, you should be aware that by installing that way you will not receive update notifications and it's a less secure way to download. We recommend that you install the F-Droid client and use that.
Download F-Droid
-
This version requires Android 5.1 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
access precise location only in the foreground
This app can get your exact location only when it is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them. This may increase battery consumption.
-
access approximate location (network-based) only in the foreground
This app can get your location based on network sources such as cell towers and Wi-Fi networks, but only when the app is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them.
-
read the contents of your shared storage
Allows the app to read the contents of your shared storage.
-
modify or delete the contents of your shared storage
Allows the app to write the contents of your shared storage.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Download APK
2 MiB
PGP Signature
-
This version requires Android 2.3 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
access precise location only in the foreground
This app can get your exact location only when it is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them. This may increase battery consumption.
-
access approximate location (network-based) only in the foreground
This app can get your location based on network sources such as cell towers and Wi-Fi networks, but only when the app is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them.
-
read the contents of your shared storage
Allows the app to read the contents of your shared storage.
-
modify or delete the contents of your shared storage
Allows the app to write the contents of your shared storage.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Download APK
2 MiB
PGP Signature
-
This version requires Android 2.3 or newer.
It is built and signed by F-Droid, and guaranteed to correspond to this source tarball.
Permissions
-
run at startup
Allows the app to have itself started as soon as the system has finished booting. This can make it take longer to start the phone and allow the app to slow down the overall phone by always running.
-
access precise location only in the foreground
This app can get your exact location only when it is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them. This may increase battery consumption.
-
access approximate location (network-based) only in the foreground
This app can get your location based on network sources such as cell towers and Wi-Fi networks, but only when the app is in the foreground. These location services must be turned on and available on your phone for the app to be able to use them.
-
read the contents of your shared storage
Allows the app to read the contents of your shared storage.
-
modify or delete the contents of your shared storage
Allows the app to write the contents of your shared storage.
-
have full network access
Allows the app to create network sockets and use custom network protocols. The browser and other applications provide means to send data to the internet, so this permission is not required to send data to the internet.
-
view Wi-Fi connections
Allows the app to view information about Wi-Fi networking, such as whether Wi-Fi is enabled and name of connected Wi-Fi devices.
-
connect and disconnect from Wi-Fi
Allows the app to connect to and disconnect from Wi-Fi access points and to make changes to device configuration for Wi-Fi networks.
Download APK
2 MiB
PGP Signature
